Convertd doc snippets to Markdown

[Mograsim.git] / docs / doc-snippets / model.txt

diff --git a/docs/doc-snippets/model.txt b/docs/doc-snippets/model.txt
deleted file mode 100644 (file)
index e107e73..0000000
--- a/docs/doc-snippets/model.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-The simulation model consists of components connected by wires.
-Some components consist of other components and wires. The components contained in such a component are called the subcomponents of this component.
-Some wires carry one bit, and some carry multiple bits.
-Each bit carried by a wire is one of 1, 0, U, Z, or X. These values are IEEE 1164-compilant. (We don't use H, L, or W.)
-       See https://en.wikipedia.org/wiki/IEEE_1164 for an explanation of these values.
-       Note: We also use X to denote illegal states. For example, when two components try to put different values on the D bus, the conflicting bits on the D bus will become X.
-
-The simulation model can be viewed in the Simulation view:
-       Each rectangle represents a component. Zooming in a component reveals its inner structure (if it has one).
-       The colored lines connecting these rectangles represent wires.
-       (Multiple-bit wires are displayed thicker than the single-bit wires, and always are black.
-       For single-bit wires, the color represents their current value. These colors can be configured in the Eclipse preferences. The default values are:
-               1 | green
-               0 | grey
-               U | blue
-               Z | yellow
-               X | red
\ No newline at end of file